Networking in any area of life is the key essential to anything. Below is a must networking list as it provides excellent information for anything you made need…Enjoy!! Read more…
We hear a lot about air conditioner sizing, whenever we make the important choice of purchasing, or installing one. What does the word sizing really mean?
Air conditioners are designed for heat removal, or addition (if heat pump is included in the single package). Therefore, the “size” of an AC, will be specified in terms of heat removal, or addition capability.
Units that we use for air conditioner sizing, are BTU/hr (British Thermal Units per hour), Ton, and Watts. Some countries utilise one unit, more than the others, in air conditioner sizing.
It is excellent if you can remember the relationship between BTU/hr, Ton, and Watts. You can quickly gauge the AC size, in case if your friends use units – that are unfamiliar to you;
- 1 ton is equivalent to 12,000 BTU/hr. And,
- 12,000 BTU/hr is equivalent to 3,516 Watts – or 3.516 kW (kilo-Watts).
Concept and fundamental of air conditioner sizing
It is based on heat gain, and/or losses in a building. It is obvious that you will need to remove the amount of heat gain into your house – if it is hot outside. Similarly, you’ll need to add in the heat loss from your house – if outside temperature is cold.
In short, heat gain and loss, must be equally balanced by heat removal, and addition, to get the desired room comfort that we want.
What determines the amount of heat removal and/or addition that we want?
It is determined by,
- the temperature difference between outside temperature, and our desired temperature. It is common sense that if you want a cool room, in a very hot climate, you’ll need to remove a lot of heat. On the other hand, it does not take much to maintain a cool room, on a mild day
- the construction material, and arrangement of your building. Let’s say, that you have two identical houses. One is build out of glass, and the other out of brick, and well insulated. Of course the one built with glass would require much more heat addition, or removal, compared to the other – given a same day.Two identical house, with different orientation with respect to the direction of sun rise and fall, will also influence the air conditioner sizing
- the surface area of the walls. The larger the surface area – the more heat that can loose, or gain through it. Hence, effects the AC size that you would need
- infiltration plays a part in determining our air conditioner sizing. Door gaps, cracked windows, chimneys – are the “doorways” for air to enter from outside, into your living space. Only you know how frustrating it can get, to feel a draft of chill, or hot air from outside
- activities and other equipment within a building. Cooking? Hot bath? Is it a gymnasium with a lot of intense exercise?
- the occupants. It takes a lot to cool a town hall full of people, doesn’t it? Oh yes, we generate heat.
Square feet method?
You might have heard about the square feet method in air conditioner sizing. In fact, it is used often by many contractors, that we sometimes use it arbitrarily. This method have been generalised, and simplified by contractors, from sizing many ACs.
The most common relationship is, “1 ton for every 500 square feet of floor area”. This method might work for a contractor, working in a small area, with similar type of houses or buildings, and similar wall material.
But, the relationship will not work, if you change the wall construction type, or if you move into a different area, with different climate. Simply said, this method of air conditioner sizing will only work for a confined group of building, in a given area.
However, this method is reasonably useful for installing window, small split, or portable air conditioners.
Categories: HVAC Training Class Info Tags:
As spring arrives this is the perfect time to do some basic maintenance to your home AC unit. One of the most overlooked aspects is the air filter in your home. Yes, the air Filter!! The filter should be changed out at least once a month, but really who does that? I think most of us change it when we walk by it, or look up at it and notice the dirt. So more than any its usually change as needed. Having a dirty air filter can reduce the economy of the unit dramatically. How you ask? Well for starters Read more…
HVAC Training Class Term of the Day!
Our Term of the Day: (Split System) Refers to an air conditioner or heat pump that has components in two locations. Usually, one part of the system is located inside (evaporator coil/air handler) and the other is located outside your home (condenser coil).
Lets explain this just a little further. I remember the days (when I thought I knew it all and just starting out) and people would refer to a split system. I really didnt understand this however, I acted as I did. Its actually quite simple! A split system refers to just exactly that “Split”…. The condenser (thats the unit outside your housez) is separate from the air handler located in your house. The air handler can sometimes be located in a closet like area or in most cases in your attic thus known as a “Split System”. What is it called when its not a spilt system? A packaged unit! Thats when your air handler, condenser and evaporator coil is all together as one “Packaged” Unit.
Hello All. We have added a great resource for all here at HVAC Training Class. com
Our Job Search Engine. You can find it (Here) or under our HVAC Links Page. It will provide you all the latest job postings in your area or areas for which you want to search.
Employers, you too can list your open jobs via our search box. Just following the instructions for listing.
I hope you all find this valuable tool useful…. Please bookmark us!!