HVAC Chat Topic

Recently I received a call from a buddy of mine asking for some AC help.  Of course he was in a panic because the temps outside were getting extremely warm Id say around the high 90’s.  Not to mention he has a 1 yr old that seems to get tempermental when things get a little hot.  Ok enough of the rambling intro.  The problem as he explained it was the air in house was blowing air but not cold.  He went outside and the unit was making a noise but the big fan wasnt running.  Could I help him? Read more…


Professional Associations

Networking in any area of life is the key essential to anything.  Below is a must networking list as it provides excellent information for anything you made need…Enjoy!! Read more…


Cooling Tips

Heating and Cooling System Tips:

For commercial facilities, request an ACCA Manual N, and for home businesses request a Manual J, evaluation of your facility’s heating and cooling loads before purchasing any major heating or cooling system. By following these guidelines you will receive a system that is sized appropriately for your facility. Read more…


Refrigerants

Refrigerants

Number
Chemical Name
Chemical Formula
Methane Series
11 trichlorofluoromethane CCl 3F
12 dichlorodifluoromethane CCl 2F 2
12B1 bromochlorodifluoromethane CBrClF 2
13 chlorotrifluoromethane CClF 3
13B1 bromotrifluoromethane CBrF 3
14 tetrafluoromethane (carbon tetrafluoride) CF 4
21 dichlorofluoromethane CHCl 2F
22 chlorodifluoromethane CHClF 2
23 trifluoromethane CHF 3
30 dichloromethane (methylene chloride) CH 2Cl 2
31 chlorofluoromethane CH 2ClF
32 difluoromethane (methylene fluoride) CH 2F 2
40 chloromethane (methyl chloride) CH 3Cl
41 fluoromethane (methyl fluoride) CH 3F
50 methane CH 4

 

Read more…


Air Conditioning Sizing Information

We hear a lot about air conditioner sizing, whenever we make the important choice of purchasing, or installing one. What does the word sizing really mean?

Air conditioners are designed for heat removal, or addition (if heat pump is included in the single package). Therefore, the “size” of an AC, will be specified in terms of heat removal, or addition capability.

Units that we use for air conditioner sizing, are BTU/hr (British Thermal Units per hour), Ton, and Watts. Some countries utilise one unit, more than the others, in air conditioner sizing.

It is excellent if you can remember the relationship between BTU/hr, Ton, and Watts. You can quickly gauge the AC size, in case if your friends use units – that are unfamiliar to you;

     

  • 1 ton is equivalent to 12,000 BTU/hr. And, 
  • 12,000 BTU/hr is equivalent to 3,516 Watts – or 3.516 kW (kilo-Watts). 

 

Concept and fundamental of air conditioner sizing

It is based on heat gain, and/or losses in a building. It is obvious that you will need to remove the amount of heat gain into your house – if it is hot outside. Similarly, you’ll need to add in the heat loss from your house – if outside temperature is cold.

In short, heat gain and loss, must be equally balanced by heat removal, and addition, to get the desired room comfort that we want.

What determines the amount of heat removal and/or addition that we want?

It is determined by,

     

  • the temperature difference between outside temperature, and our desired temperature. It is common sense that if you want a cool room, in a very hot climate, you’ll need to remove a lot of heat. On the other hand, it does not take much to maintain a cool room, on a mild day 
  • the construction material, and arrangement of your building. Let’s say, that you have two identical houses. One is build out of glass, and the other out of brick, and well insulated. Of course the one built with glass would require much more heat addition, or removal, compared to the other – given a same day.Two identical house, with different orientation with respect to the direction of sun rise and fall, will also influence the air conditioner sizing
  • the surface area of the walls. The larger the surface area – the more heat that can loose, or gain through it. Hence, effects the AC size that you would need 
  • infiltration plays a part in determining our air conditioner sizing. Door gaps, cracked windows, chimneys – are the “doorways” for air to enter from outside, into your living space. Only you know how frustrating it can get, to feel a draft of chill, or hot air from outside 
  • activities and other equipment within a building. Cooking? Hot bath? Is it a gymnasium with a lot of intense exercise? 
  • the occupants. It takes a lot to cool a town hall full of people, doesn’t it? Oh yes, we generate heat.
    Join Vault.com and save $20 Today!


Square feet method?

You might have heard about the square feet method in air conditioner sizing. In fact, it is used often by many contractors, that we sometimes use it arbitrarily. This method have been generalised, and simplified by contractors, from sizing many ACs.

The most common relationship is, “1 ton for every 500 square feet of floor area”. This method might work for a contractor, working in a small area, with similar type of houses or buildings, and similar wall material.

But, the relationship will not work, if you change the wall construction type, or if you move into a different area, with different climate. Simply said, this method of air conditioner sizing will only work for a confined group of building, in a given area.

However, this method is reasonably useful for installing window, small split, or portable air conditioners.


Next Page »